flex sensor glove

we started off by using cable ties to hold the flex sensors down however we couldn't find the balance between having it tight enough to hold the flex sensors in place and not too tight so the glove can come on and off.

next we tried cello tape which we found wasn't effective as it wasn't able to stick to the elastic part of the glove and wouldn't last in the long term.

after we tried to flip the glove to use the grip material to attach the flex sensors but we found the glove wouldn't bend as much and the flex sensor reading weren't as precise.

after we tried sowing this was the best was as we could attach the flex sensor as tight as we want with out making the glove any tighter also we could add multiple points to help the flex sensor become flush with the glove.

Next we added super glue to the end of each flex sensor just to add a bit more support.

Next we decided to change the glove to make it look more professional instead of sew we slid the flex sensors in between the 2 layers of fabric. then super glued the end.